We make Level Sensor, Tank Gauge, Tank Indicator, Level Transmitter.

UL-100 with 4-20 mA Current Output
Optional Outputs: 1 - 5 VDC, or RS232C direct computer connection.
  
Function:
Continuously senses liquid level in tanks and outputs a 4-20 mA current proportional to the level. The monitoring is done without contacting the liquid. The current output can be connected to a programmable controller, computer, remote display or relay module.
Also, displays liquid level in tank.
  
Use:
Any liquids or slurries, including:
Chemicals, Acids, Caustics, Oils, Fuels, Gasoline, Lubricants, Adhesives, Creams, Lotions, Viscous Fluids, Pharmaceuticals, Foods, and Beverages, Open Channel Flowmeter, Flow computer.
 
Features:
  • Non-Contact Sensing
  • No Calibration
  • No Maintenance, Easy Installation
  • Rugged, Air and Water-Tight, Explosion-proof Transducers
  • Not Affected by Condensation
  • Automatic Temperature Compensation
  • Displays level in tank.
  • Self-testing
  • US Made

Range of use:
Model UL-100 for tanks to 15 feet high, 4.5 meters.
Model UL-200 for tanks to 40 feet high, 12 meters.
Tank level sensor, liquid level sensor, level transmitter.


 Level transmitter, liquid level transmitter UL-100.

UL-100 Level Transmitter
 
Advantages of our transmitter:
  • The control electronics are remote from transducer (sensor) and may be mounted at the ground level wherever convenient. All wiring connections are done at the ground level, no need to climb on the tank top as is the case with products by other manufacturers.
  • The remotely mounted electronics are protected from summer heat and winter cold, from rain, ice, and humidity. Our transmitter will last much longer than products that have the transducer and electronics in one package, mounted at the top of the tank.

  • Calibration is done by turning Zero and Span switches, marked in inches or centimeters. It can be performed anywhere, prior to installation or during operation. The power to the unit does not even need to be turned on.

SPECIFICATIONS

Ranges = Tank Height:
UL-100... 0-15 feet, 4.5 meters.
UL-200... 0-40 feet, 12 meters.
 
Outputs:
8-digit LCD readout of level, std.
4-20 mA into 600 Ohm, std.
1-5 VDC or 2-10 VDC, opt.
RS232C, distance up to 2000 ft., opt.
Remote digital display, opt.
 
Accuracy:
±0.3% of span
 
Repeat ability:
±0.1% span
 
Resolution:
0.002 ft. max
  
Power:
115VAC ±10%, 50/60Hz, 5 VA, std.
220VAC ±10% 50/60Hz, opt.
+ 12 to + 24 VDC, 0.3 Amp., opt.
 
Enclosure:
NEMA 4X polycarbonate
7" x 9" x 4", std.
  
Warranty:
18 months from the date of shipment.
Standard Sensors (Transducers):
      
Standard with UL-100:
#7508, all PVC housing,
9" blind zone, 10° beam
   
Standard with UL-200:
#4012A, all PVC housing,
18" blind zone, 12° beam
Temp. - 40°F to 170°F, both above.
 For suggested transducer mounting, Click Here.

Optional Sensors:
  • #4012BS, 316 stainless steel housing
  • #4012BS/CSA, 316 SS, Explosion-proof, CSA approved for all Class I, Groups A, B, C & D.
    Both above: Range 35 ft., blind zone 18"
    Oper. temp. - 40°F to 190°F
  • #2006, PVC housing, range to 4 ft. blind
    zone 5 inches, Temp. 0°F to 160°F, 6° beam.
  • Note: All sensors (except for 316SS) are
    available In Teflon® or Kynar® housing.
  • Mounting flanges available, 3" to 8" PVC.

    See TRANSDUCERS.
     For suggested transducer mounting,
    Click Here.

Sensor Cable:
RG62/U coaxial, 30 ft. std. length,
longer cable installed when ordered.

Any question? Call 941-964-1361 now.
 


Sonix-1000 • UC-4000 • UL-1000 • LP-10 • Sonix-50 •  Sonix-40 •  Sonix-11 • Transducers • Home • Contact Us

Automated Sonix Corporation
P.O. Box 1888 • Boca Grande • FL 33921
Tel: (941) 964-1361 • Fax: (941) 964-2902