|
|
| Output: |
DPDT relay, 5 Amperes contact rating at 120 VAC or 250
VAC. The relay is energized during free flow
(material not present) and de-energized on material present. |
| Sensors: |
Ultrasonic, PVC housing, size 1-1/4" diameter,
2" length, model SG1. |
| Sensor Mounting: |
1" NPT, male thread. |
| Optional Sensors: |
Teflon, Stainless Steel or Kynar. |
| Sensor Range: |
To 15 feet with standard sensors SG1 (shown on the
photo), range to 30 feet with optional sensor model SG2 (2" dia,
3" length). |
| Relay Delays: |
From 0 to 10 seconds on Break and Make, independently
adjustable. |
Indicating Lights:
|
RED is blinking when
transmission between sensors is unaltered (free flow), i.e. material
is not present. The light is OFF when material is present
(interrupted signal). |
|
YELLOW is ON when relay is
energized, OFF when de-energized. |
| Power: |
120 VAC, 0.1 Amp., std. |
|
18 to 28 VDC, 0.15 Amp., std. |
|
220 VAC optional. |
|
Green LED Power-On
indication, std. |
| Sensor Wiring: |
20 feet of coaxial cable
supplied with each sensor, longer cables are available upon request. |
| Enclosure: |
NEMA 4X polycarbonate, clear
view top, size 5" x 7" x 3". |
| Operating Temp.: |
from -20° F to
+190° F. |
| Warranty: |
12 months from the date of
shipment under normal use. The warranty carries no liability,
expressed or implied, beyond the obligation to repair or replace the
part under warranty. |
| CAUTION: |
To prevent a possibility of
injury, do not place any part of your body in the hopper or chute in
attempt to clear, free or dislodge the material while any part of machinery is
in operation! Install and service SoniGuard only with all machinery
turned OFF ! |
|
