Non-Contact Ultrasonic Level Transmitter
with a 4-20 mA current output
or RS232C output,
models Sonix-50 and Sonix-60
|
Optional Outputs:
•
1-5 VDC,
2-10
VDC
(multiple orders).
• RS232C direct computer
connection.
• Linearized current output,
proportional to volume in
horizontal tanks.
|
|
Features:
Non-Contact Sensing
Ranges up to 40 ft (12 meters)
No Maintenance, Easy Installation
Rugged, Air & Water-Tight
Not Affected by Condensation or Hose-down
Automatic Temperature Compensation
Self-testing
US Made
|
Applications:
Any Liquids or Slurries,
including:
Chemicals, Acids, Caustics
Oils, Fuels, Lubricants,
Pulp and Paper, Adhesives,
Creams, Lotions, Viscous Fluids,
Pharmaceuticals, Foods,
Beverages, Flowmeters.
|
Advantages of our Transmitter:
* One piece, small size.
* Waterproof (NEMA4X) cartridge,
can be sealed air and water-tight.
* Operates on 12-24 VDC power.
* Provides smooth current output
without surges.
* Optional TeflonŽ, KynarŽ or 316
stainless steel radiating face.
* Repairable in field. |
Range (Tank Height):
* Sonix-50 ..... to 15 feet, (4.5 meters)
* Sonix-60 ..... to 40 feet, (12 meters)Function:
Continuously monitors liquid level
and provides a 4-20 mA current proportional to the level. Does not contact the liquid. The current
output can be connected to a programmable controller, remote display, computer, chart
recorder, etc.
|
Calibration:
The calibration of current output is done by switches, one sets the 4 mA
(or LOW) level, the other sets the 20 mA (or HIGH) level.
We would be happy to pre-calibrate for you! As an option
on multiple orders, it
can be calibrated from a laptop or any computer with a serial port. |
Ultrasonic
Principle:
The transmitter operates using an ultrasonic echo,
reflected from the monitored surface. The signal is directed perpendicularly toward the
monitored surface. The time delay of the returned echo enables the internal microprocessor
to determine the liquid level. |
Sonix-50 Operation & Specifications
Home
Contact Us |
